Connection Manual

• Double click "My Computer" | "Control Panel" | "Modem", show as figure 1.

Figure - 1

• Select "Modems" tab, show as figure 2 select "Add..." button.

Figure - 2

• Don't check at "Don't detect my modem; I will select it from a list" then select "Next".

Figure - 3

• Windows 2000 will detecting for a new modem.

Figure - 4

• After finishing detect a new modem will show as figure 5.

Figure - 5

• Select "Finish".

Figure - 6

• Your detected modem will show in modem list as figure 7.

Figure - 7

• Double click "My Computer" | "Control Panel" | "Phone and Modem Options".
• Select "Modems" tab, select modem disire modem list, then select "Properties" button.

Figure - 1

• Select "Diagnostic" tab.

Figure - 2

• Select "Query Modem" button.

Figure - 3

• Windows 2000 will communicating with a modem.

Figure - 4

• After finished communicating with a modem will show as figure 5.

Figure - 5

• If you need to add "AT command", select "Advanced" tab then type "AT command" into "Extra initialization commands" as figure 6.

Figure - 6

• Double click "My Computer" | "Control Panel" | "Network and Dial-up Connections".
• Double click "Make New Connection" then select "Next" as figure 1.

Figure - 1

• Make a selection at "Dial-up to the Internet" as figure 2 then select "Next".

Figure - 2

• Make a selection as figure 3 then select "Next".

Figure - 3

• Make a selection as figure 4 then select "Next".

Figure - 4

• Type a KSC's dial-up number at "Telephone number" then select "Next".

Figure - 5

• Type your "Username" and "Password" then select "Next".

Figure - 6

• Make a selection as figure 7 then select "Next".

Figure - 7

• Uncheck a selection as figure 8 then select "Finish".

Figure - 8

• The conncetion icon will appear as figure 9.
  

Figure - 9

• Right click (click the right button of your mouse) at "KSC" icon then select "Properties".
• Check your configuration in "General" tab as figure 10 then select at "Configure..." button will show as figure 10.1.

Figure - 10

Check your configuration as figure 11.1 then select "OK", will back to figure 11, at figure 11 select next tab ("Options" tab) to continue.

Figure - 10.1

• Check your configuration in "Options" tab as figure 11 then select next tab ("Security" tab).

Figure - 11

• Check your configuration in "Security" tab as figure 12 then select next tab ("Networking" tab).

Figure - 12
For "bring-up terminal" select at "Show terminal window"

• Check your configuration in "Networking" tab as figure 13 and select at "Internet Protocol (TCP/IP)" then select "Properties" button.

Figure - 13

• Check your configuration in as figure 13.1 then select "Advanced" button.

Figure - 13.1

• Check your configuration in "General" tab as figure 13.1.1 then select next tab ("DNS" tab).

Figure - 13.1.1

• Check your configuration in "DNS" tab as figure 13.1.2 then select next tab ("WINS" tab).

Figure - 13.1.2

• Check your configuration in "WINS" tab as figure 13.1.3 then select next tab ("Options" tab).

Figure - 13.1.3

• Check your configuration in "Options" tab as figure 13.1.4 then select "OK" will show as figure 13.1, at figure 13.1 select at "Sharing" tab.

Figure - 13.1.4

• Check your configuration in "Sharing" tab as figure 14 then select "OK".

Figure - 14

• Double click "My Computer" | "Control Panel" | "Network and Dial-up Connections" will see as figure 1.

Figure - 1

• Type your username and your password then select "Dial".

Figure - 2

• Windows 2000 will connecting to KSC
• When connection is established the bottom-right corner will show as a connection icon and informed you a connection speed.
• You already connect to the internet you can surf the webpage and send email and so on.